ONE-COMPONENT MOLDED L- AND T-SHAPED RF SHIELDS
en
ru

ONE-COMPONENT MOLDED L- AND
T-SHAPED RF SHIELDS

  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS
  • ONE-COMPONENT MOLDED L- AND <br> T-SHAPED RF SHIELDS

    • One-component molded L- and T-shaped RF shields are attached to the board by mounting pins or by surface assembly. Brass, Alloy 770-nickel-silver, tinned sheet metal and stainless steel are the principal materials used.

    Shield height can vary within the range from 3 to 15 mm, thickness of the selected material from 0.15 to 0.6 mm. Corners are joined either arbitrarily or using “jalousie”-method and by virtue of laser welding. There is a possibility of copper, aluminum or titanium spraying. When necessary logo-, serial number application and placement of other information are done by way of silk-screen- and UV-printing and laser marking.

    We are not limited by standard sizes and can produce RF shields using any technology and patterns required for your device.


    shipment:
    from 2 days
    Leave a message