Two-Component Molded Multi-Section Shields from Electromagnetic Interference in Moscow
en
ru

TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS

  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS
  • TWO-COMPONENT MOLDED MULTI-SECTION SHIELDS

    • Two-component molded multi-section shields are attached to the board by mounting pins or by surface assembly. Alloy 770-nickel-silver, tinned sheet metal and stainless steel are the principal materials used. Shield height can vary within the range from 4 to 12 mm, thickness of the selected material from 0.15 to 0.6 mm, and. Corners are joined either by “jalousie”-method, laser welding or arbitrarily. There is a possibility of copper, aluminum or titanium spraying. When necessary logo- and serial number application are done by way of silk-screen-, UV-printing and laser marking.

    We are not limited by standard sizes and can produce shields using any technology and patterns required for your device.

    shipment:
    От 2 дней
    Leave a message